Pharmaceutical

Pharmaceutical applications require hygiene, precision measurement, monitoring, blending, and means of maximizing shelf life, all while not taking their eye off workplace safety and environmental protection. ProDetec can be your support in many of these needs.

Skid Mounted System Units: ProDetec offers you exclusive representation of the German company, Centec. Centec manufactures fully automated skid-mounted process units and high precision measurement devices. Centec are world leaders in Water purification in the production, storage and distribution of Purified Water (PW), Highly Purified Water (HPW) and Water for Injection (WFI).

High Precision Sensors: Centec sensors are joined by Sigrist to offer high precision and low maintenance instruments to help you have better control and less wastage in your system. We also work with you to keep an eye on your environmental responsibilities. From DO and O3 to turbidity and density and more.

Applications

Turbidity in liquids is used as a direct measure of the effectiveness of cleaning steps such as filtration and an indirect indication of particle or solids concentration in liquids.

TurBiScat

TurBiScat

The Sigrist TurBiScat monitors turbidity in liquids. Depending on your application, The TurBiScat can monitor turbidity at 90° and/or 25° using the highly accurate scattered light principle. There is an additional option of measuring Colour at a 430nm wavelength to monitor beer colour in EBC.

The combination of Hastelloy and sapphire in a seal-less design allows operating the unit in practically all process applications. Window fouling is monitored, compensated and can be checked using an anti-fouling control. Calibration is easily performed easily and at lab values of accuracy using a secondary reference standard.

 

 

TurBiGuard

TurBiGuard

The brewing, wine, sugar and beverage industries have the Sigrist TurBiGuard specifically designed for monitoring medium to high turbidity, in hygienic process liquids. The TurBiScat measures turbidity using the absorption method and is typically mounted inline using a Varivent connection. The focus of the TurBiScat is for easy installation and extremely low maintenance. There are no seals to replace and the calibration only requires a zero setting.

 

LabScat

LabScat

The TurBiScat monitors turbidity in liquids. Depending on your application, we can offer 90°/25° scattered light measurement with the option of Colour at a 430nm wavelength. The combination of Hastelloy and sapphire in a seal-less design allows operating the unit in practically all process applications. Turbidity measurement is done with colour compensation. Window fouling is monitored, compensated and can be checked using an anti-fouling control. Calibration is easy and very accurate with a precision optical calibration check cell, specific to each instrument.

 

AquaScat 2

AquaScat 2

The AquaScat measures turbidity of potable, recycled and  raw water according to IEC 27027 using 90° scattered light detection in a non-contact, free-falling water stream. This contactless design eliminates window fouling and eliminates the need for regular maintenance (other than an annual filter change).

Calibration is performed either automatically (AquaScat WTMA) or manually (AquaScat TWM or HT) with a calibration checking unit specific to that instrument.

With a range of 0-4,000NTU, the AquaScat is sensitive enough to be used for post-filtration potable water to a heavy rain event raw water. There are 8 pre-set 4-20mA measuring ranges in the AquaScat, but any of these can be easily modified to suit your specific purpose (see the AquaScat video on setting your own measuring range).

SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

Optimize your process with a continuous concentration measurement of different substances in liquids. A typical application is to monitor waste water for traces of phenol. Effluent from mineral oil processing plants, plastics production etc. contain a high amount of phenol and have to be treated prior to being discharged into the environment.

Beer Monitor

CombiTec

COMBITEC is used for 3-component solutions to measure simultaneously density, sound velocity and concentration e. g. in a mixture of acid and salt in water or in systems such as sulfuric acid/oleum or methanol/formaldehyde.

ColorPlus Ex

ColorPlus Ex

The ColorPlus Ex, in both inline and bypass configurations, is designed to accommodate up to three different light sources (UV and visible range) for the measurement of color, DOC and concentrations. For example, one (or two), of the colours can be used to measure concentration, and the third light source can be used for turbidity compensation, if turbidity is a potential complicating factor in your process.

This ColorPlus Ex version features a flameproof encapsulation and is offered for installations in areas requiring explosion protection.

 

Sirel Ex

Sirel Ex

The Sirel Ex is the hazardous area Operator Interface for the ColorPlus Ex (colour and UV) and DualScat Ex (turbidity). The Sirel Ex has simple installation specifically for mounting in an Ex-zone with user controls and display. The display of the unit is visible through a safety window at any time.

By using continuous colour measurement, you ensure that a consistently high product quality is obtained and that the efficiency of the production processes is enhanced.

ColorPlus 2

ColorPlus 2

Knowing the organic load of your raw water and the colour staining of your raw water intake can provide a feed-forward element of control to your water treatment process to optimise the treatment process and save money.

Until now, measuring the dissolved organics and colour required an expensive system. With the Sigrist ColorPlus the upfront cost is low enough so that your ROI is going to be much higher, much sooner.

The ColorPlus measures the colour by absorption online using up to three different wavelengths. The bypass measuring cell has been specifically designed for applications within the water industry. Depending on the configuration you select, it allows measuring DOC (UV absorption) and colour (Hazen) simultaneously while compensating for turbidity, which would otherwise influence the results

SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

The quality of ultrapure water for production and cleaning processes has to meet high standards. Ozone is a powerful oxidizing agent and is well suited for disinfection and sanitisation of ultrapure water.

ColorPlus 2 03 Water and Gas

ColorPlus 2 03 Water and Gas

The ColorPlus O3 analyuser can be setup to measure ozone in either gases or ultra-pure water. Let’s have a brief overview of both versions.

Measuring Ozone O3 in Water: The Sigrist ColorPlus 2 O3 Ozone meter for ultra-pure water measures the ozone concentration at a wavelength of 254nm according to standard DIN 19627 and the IOA (International Ozone Association). This instrument has a special measuring cell with a path-length of 100mm which allows measuring ozone in ultra pure water in the ppb range.

Measuring Ozone for Gases measures the ozone concentration according to standard DIN 19627 and the IOA at a wavelength of 254nm. According to these standards, the extinction coefficient is 3024 l/mol cm. Therefore, the ozone measurement can be regarded as an absolute measurement requiring no calibration with ozone.

SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

Measuring density of a sample is an important quality parameter of both raw materials and finished products. Various techniques enable the density of solid, viscous and liquid materials to be accurately determined e.g. metals, plastics, chemicals, lubricants and food.

SonaTec

SonaTec

SONATEC is a highly precise sound velocity sensor for determination of sound velocities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.

RhoTec

RhoTec

RHOTEC is a highly precise density sensor for determination of densities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.

RhoTec L

RhoTec L

RHOTEC L is a highly precise sensor for determination of densities and concentrations (e. g. of extract, alcohol, sugar, acids, caustics, and solvents) according to the oscillating U-tube principle. The samples are manually injected into the sensor. The instrument is designed for laboratory applications requiring maximum sensitivity and highest accuracy.

With the use of an in-line phase switch, phase transitions in liquids can be detected accurately with the aid of turbidity or colour. This reduces product loss and results in reduced water and energy consumption.

PhaseGuard

PhaseGuard

The PhaseGuard monitors phase change of product with water, yeast or CIP transitions by methods of turbidity or colour. The three models of the PhaseGuard cover most the possible applications: phase switch for turbidity (model T), for high turbidity (model HT) or based on of the products (model C). 

The PhaseGuard is factory adjusted with a universal measuring range based on absorption. For simple applications and system integration the instrument configuration and communication can be easily done using the serial interface in the instrument itself. combination with the existing outputs. For local monitoring and control, the optional control unit SICON with touch screen technology and colour display can be connected. 

SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

SonaTec

SonaTec

SONATEC is a highly precise sound velocity sensor for determination of sound velocities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.

RhoTec

RhoTec

RHOTEC is a highly precise density sensor for determination of densities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.

OXYTRANS is a very precise, optical oxygen sensor for measurement of O2 in liquids and gases. A typical application is the oxygen measurement in boiler feed water and in protective atmospheres.

OxyTrans

OxyTrans

Optical Oxygen Sensor

The Oxygen concentration transmitter OxyTrans TR measures continuously and accurately measures the content of oxygen in liquids and gases. While the OxyTrans was originally designed for breweries, it has found service in other industries demanding these levels of accuracy, for example power plants or bioreactors.

The O2-concentration can be displayed in different units like ppb, ppm, %oxygen, etc.

The OxyTrans is available as either a transmitter installed inline (with the TR designation) or a handheld Mobile device (with the M suffix).

Where more stringent hygienic standards apply, sterilization-in-place (SIP) is done after CIP cleaning. SIP kills harmful microorganisms that may have survived CIP or in cases where Cleaning-in-Place is not performed.

Cleaning in Place

Sterilization in Place

Where more stringent hygienic standards apply, sterilization-in-place (SIP) is done after CIP cleaning. SIP kills harmful microorganisms that may have survived CIP or in cases where Cleaning-in-Place is not performed.

The purpose of Cleaning-in-Place (CIP) is to remove product residues and microorganisms from all wetted surfaces inside tanks, pipework and filling machines. Centec provide CIP skids for cold and hot cleaning in pharmaceutical industry.

Cleaning in Place

Cleaning in Place

The purpose of Cleaning-in-Place (CIP) is to remove contaminations from wetted surfaces inside tanks, pipework and filling machines. A CIP cycle consists of various steps, e. g. pre-rinse with water, flushes with caustics and acid solutions, intermediate and final rinse with water.

Raw water quality depends greatly on its source. Based on the raw water quality and the specifications for the purified water, Centec select the most appropriate technologies for each client. Usually, multi-stage regimes are necessary for water purification.

AquaScat 2

AquaScat 2

The AquaScat measures turbidity of potable, recycled and  raw water according to IEC 27027 using 90° scattered light detection in a non-contact, free-falling water stream. This contactless design eliminates window fouling and eliminates the need for regular maintenance (other than an annual filter change).

Calibration is performed either automatically (AquaScat WTMA) or manually (AquaScat TWM or HT) with a calibration checking unit specific to that instrument.

With a range of 0-4,000NTU, the AquaScat is sensitive enough to be used for post-filtration potable water to a heavy rain event raw water. There are 8 pre-set 4-20mA measuring ranges in the AquaScat, but any of these can be easily modified to suit your specific purpose (see the AquaScat video on setting your own measuring range).

The ion exchange system IONTEC softens water used e. g. for heating, cooling and cleaning. Water hardness causes scale deposits in piping and process systems.

IonTec

IonTec

Water Softening & Demineralization

IONTEC softens or demineralizes water used for beverages or for other purposes (e. g. for heating, cooling, cleaning). For ion exchange there are ion exchange resins in the unit. They contain loosely held cations or anions.

The reverse osmosis system REVOTEC produces demineralized water that is perfectly suited as boiler feed water or for treatment in subsequent purification steps. Considering the quality of the raw water, the unit is designed individually for each specific application.

RevoTec Reverse Osmosis

RevoTec Reverse Osmosis

REVOTEC produces demineralized water perfectly suited for beverages, as boiler feed water and for treatment in subsequent purification steps. If a semipermeable membrane is placed between pure water and water with dissolved ions (salts) osmosis will come into play.

DeGas - Membrane (DGS)

DeGas – Membrane (DGS)

Membrane Water Deaeration

To produce quality beverages with long shelf life, and to prevent corrosion of boiler and piping systems, water needs to be deaerated. Based on the use of highly effective membrane modules, extraordinarily low values of residual oxygen are achieved.

Dissolved oxygen is a prime cause of corrosion. The deaeration system DGS removes O2 from water that is used e. g. for steam generation or rinsing purposes. The system is compact and easily expandable.

The additive dosing system ADoS is used for dosing of ingredients such as enzymes, colours, acids or caustics directly into the main product stream. The compact skid provides a high degree of flexibility for the production of different products (brands).

Additive Dosing (ADoS)

Additive Dosing (ADoS)

Additive Dosing

The additive dosing system ADoS is used for dosing smaller or larger amounts of ingredients such as e. g. hop extract, flavours, colours, enzymes and vitamins directly into the main product stream. The compact skid provides a high degree of flexibility for the production of different products (brands).

ProDetec has access the the worlds best gas detectors for a wide range of industries.  Whether the need is for a single application or multiple sites and areas, our durable gas monitoring solutions meet your unique industrial needs. We offer a broad range of gas detectors and controllers to satisfy international certification standards such as  SIL (Safety Integrity Level), Marine and IECEx.

GD10P Hydrocarbon Infra Red Point Gas Detector

GD10P Hydrocarbon Infra Red Point Gas Detector

The Simtronics GD10P detector is the benchmark for combustible gas detection for offshore oil and gas installations. It has set the standard for gas detectors in the areas of safety, stability and low maintenance both onshore & offshore. 

The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. 

These IR gas detectors differ from all other models, because they utilise silicon based solid-state IR sources. The complete opto-mechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs. 

We offer the longest combined detector and IR source warranty on the market. 

For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using cabling and control modules. 

iTrans 2 Gas Detector

iTrans 2 Gas Detector

The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance, and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up, or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

OLCT100 Gas Detector

OLCT100 Gas Detector

Designed for the detection of explosive gases, toxic gases or oxygen, this combustible gas detector comes with Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application ProDetec offers a solution: catalytic, electrochemical, semiconductor, or poison control version. IEC Ex approved, these detectors are available in explosion safe or intrinsically safe versions. SIL 2 certified according to EN 50402.

OLCT10N Gas Detector

OLCT10N Gas Detector

Digital combustible detector for oxygen, toxic or combustible gases.

The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.

OLCT10 Gas Detector

OLCT10 Gas Detector

Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapours in ambient air. Easy to install and operate, these detectors combined with the MX 32 control unit meet demanding user requirements.

CTX300 Gas Detector

CTX300 Gas Detector

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. 

GD10P CO2 Gas Detector

GD10P CO2 Gas Detector

 The Infrared (IR) gas detectors differ from all other models, because they utilise silicon based solid-state infrared sources. The complete opto-mechanical design construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
The Simtronics GD10 Series of gas detector offers the longest combined detector and IR source warranty on the market: 5 years warranty & 15 years on IR sources.

MCX-32 Smart Wireless Controller

MX32 Multi Channel Controller

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. 

MX43 SIL-1 Certified Gas Detection Controller

MX43 SIL-1 Certified Gas Detection Controller

SIL-1 Certified MX 43 is a Flexible, High Quality, Easy to Use Gas Detection System 

Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings. 

MX52 2- 16 Channel Gas Detection Controller

MX52 2- 16 Channel Gas Detection Controller

The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact requirements.

ProDetec can offer our customers innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency to protect your workers from potential gas hazards. These gas detectors can be readily calibrated and tested on site with the aid of Automated Calibration and Bump Testing Stations.

MGC Simple Plus 3 Year

MGC Simple Plus 3 Year

No charging ever! 3 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.

MGC Simple 2 Year

MGC Simple 2 Year

No charging ever! 2 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for two full years.

PS200 4 Gas Monitor

PS200 4 Gas Monitor

The PS200 Multi Gas Detector combines quality, ruggedness, and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards. 

The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications. 

In addition to extensive data logging capabilities, the PS200 is available with an optional internal pump and an extensive range of accessories to meet a wide variety of user applications. 

PS500 CO2 Gas Monitor

PS500 CO2 Gas Monitor

The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.

MGC IR

MGC IR

The MGC IR detects combustible gases (LEL), hydrogen sulphide (H2S), carbon monoxide (CO) & oxygen (O2). The MGC IR can go a full 2 months without a charge, even without ever having to be turned off. Shut down the detector nightly and the battery can last up to 4 months.

MGC IR Pump

MGC IR Pump

Like the MGC IR, the MGC IR Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC IR Pump uses an IR source which conserves power and helps the battery last and last.

Single Gas Clip (O2, CO, H2S)

Single Gas Clip (O2, CO, H2S)

Whether it’s the hottest or the coldest environment, our Single Gas Clip is designed and tested to provide worker safety in the harshest working conditions. Gases available are hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2).

Protege ZM Single Gas Monitor

Protege ZM Single Gas Monitor

The GMI Protege ZM Single Gas Monitor is an easy-to-use, zero maintenance gas detection solution that delivers high performance in a small, ergonomically designed package. It is available in oxygen, carbon monoxide and hydrogen sulphide single gas models. This single gas monitor is incredibly reliable, giving industrial workers and first responders the confidence to focus on the task at hand, not on their equipment.  

MGC Simple Plus 3 Year

MGC Simple Docking Station

The Gas Clip Technologies MGC Simple Clip Dock is an all-in-one, stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

PS200 ABC Station

PS200 ABC Station

The multi-functional Auto Bump/Calibration station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit.

PS500 5 Gas Monitor

PS500 ABC Station

To provide accurate performance and results, the PS500 has to be properly used and maintained. The Auto Bump & Calibration Station (ABC) provides bump testing, calibration and data management options and is compact, robust and intuitive to use.

MGC IR

MGC Docking Station

The Gas Clip Technologies MGC Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

MGC IR Pump

MGC Pumped Docking Station

The Gas Clip Technologies MGC Pump Clip Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

At ProDetec we can supply specialised gases and gas mixtures to meet various and specific requirements. We work with you to understand your application and analyse your consumption patterns. This way we can offer the correct cylinder size that maximises your efficiency while minimising costs.

44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 44 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 66 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder

103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder

Disposable cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures

Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Warranty on these gases is 48 months.

 

105 Litre Aluminium Recyclable Reactive Single Gas Calibration Gas Cylinder

105 Litre Aluminium Recyclable Reactive Single Gas Calibration Gas Cylinder

Recyclable 105 litre cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures.

Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Typical Shelf life 48 months

116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 116 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

Regulators and Accessories

Regulators and Accessories

Regulators for non-refillable cylinders are available in a number of different configurations including fixed flow, push button, on-demand flow and variable flow models.

Gas Recycling Program

Gas Recycling Program

Once the calibration gas cylinders are relieved of pressure they are NOT considered hazardous material or waste. Nearly all of our mixtures contain only a very small amount of a hazardous chemical(s) as a minor component in the gas mixture requested. The fact that it is such a small amount (usually in the ppm range) always precludes the gas mixture from ever being classified as hazardous.

Our EcoSmart cylinder program is an environmentally-friendly way to reduce waste caused by empty cylinders. We have six EcoSmart cylinder sizes and offer a free, easy way to return used cylinders for future use.

Measure the ambient dust concentration trends in a factories to manage explosion risk and improve worker safety.

DUMO

DUMO PRO Ambient Dust Monitor

New and Improved continuous ambient air dust monitor for industrial environments.

Low maintenance real-time 24/7 trend monitoring in key areas to detect and alarm of dust events with fast response to changes in process conditions, the DUMO Pro utilises Sintrol’s proven measuring technology

DUMO

DUMO

Continuous dust monitor for trend monitoring in ambient air environments.

With increasing demands for workplace health the ability to measure changes in ambient air dust concentration becomes more important by the day. All areas where dust might cause harm to employees or sensitive devices can now be monitored and dust extraction systems operated accordingly.

Wireless Solutions

Wireless Solutions

In addition to our measurement devices, Sintrol’s Wireless Monitoring System makes it easier to connect, track, manage and control a network of dust monitors. Using any combination of Sintrol’s dust monitors, the entire system can be integrated and set up via our RF network and managed with our DustLog 8 software.

DustLog8

DustLog8

DustLog 8 is the premier central management solution for dust measurement equipment.

It gives plant operators full control over the network of dust monitors with efficient parameterising, reporting and networking functions on an easy to use interface. By unifying all of Sintrol’s latest technology into one management tool, DustLog 8 brings not only greater convenience and usability, but also improves plant efficiency, network management and worker safety for the end user.

The DustLog 8 PC software can be connected via a network router to the dust monitors. RS485, Modbus and RF are supported

Dust explosions can occur frequently in industrial processes where combustible material is transported/ pneumatically or mechanically conveyed, heated, filtered, spray dried, milled and stored

RSV Fast Shutting Gate Valve

RSV Fast Shutting Gate Valve

RSV fast shutting gate valves prevent propagation of dust explosions by blocking the shock wave and flame. RSV fast shutting gate valves are active valves closing in a matter of milliseconds when triggered by a spark or explosion detector. 

StuVent Explosion Venting

StuVent Explosion Venting

The oldest and most frequently used explosion protection technique is explosion venting. That means that weak points are deliberately introduced in the equipment in a controlled way. In case of an explosion, these weak points will open, and the explosion pressure is released. It is not easy to calculate and correctly position the right venting surface. 

NOVEX Passive Explosion Isolation Flap Valve

NOVEX Passive Explosion Isolation Flap Valve

The NOVEX series is a protective system consists of passive non-return flap valves for the explosion isolation of combustible dust. The main application for the NOVEX valves is for explosion isolation on pipelines at inlet of dedusting filters operating under vacuum and protected by autonomous explosion vent panels. 

VENTEX Passive Isolation Valve

VENTEX Passive Isolation Valve

Ventex explosion isolation valves prevent propagation of dust explosions by blocking the shock wave and flame front. Ventex valves are passive valves meaning they will close without requiring any external input. 

Flame Catcher

Flame Catcher

In case of an explosion, the Flame Catcher prevents flames from propagating beyond the Flame Catcher.

During truck unloading the product can get charged electrostatically. This way the truck itself will be charged up, too (if the product is charged negatively, the truck will have a positive load). As a truck has a relatively large electric capacity, this may lead to very powerful spark discharges.

TES01 Truck Earthing System

TES01 Truck Earthing System

Loading and unloading of tanker trucks with liquids or powders can generate static electricity that could cause sparks discharging. The Stuvex TES01-V2 earthing verification system has been designed to detect a low electrical resistance between the clamp jaws that are attached to the truck’s earthing point. 

TES01 Truck Earthing System

S604 and S608 Static Discharge Systems

An electrostatic charge can be generated while handling conductive liquids or powders.  A resistive system (S604) recognises the low conductive resistance of the object and of fixed installations. It is meant for general use with barrels, carts, metal objects. Uncontrolled electrostatic discharge when filling or unloading big bags is a frequent source of ignition. The earthing Control System (S804) recognises the conductivity of an FIBC (Big Bag) type C.

RSV Fast Shutting Gate Valve

RSV Fast Shutting Gate Valve

RSV fast shutting gate valves prevent propagation of dust explosions by blocking the shock wave and flame. RSV fast shutting gate valves are active valves closing in a matter of milliseconds when triggered by a spark or explosion detector.