- Industries
- Dairy
Dairy
ProDetec is your pathway to monitoring key quality measuring points in your process. This results in higher product quality and less waste by giving you accurate and fast values that you can rely on to make the best decisions to keep you on top of your game. For example, to minimise product waste, you need to know that exact phase change between CIP and product. If you can’t see your key measurement criteria below, send us a quick email with your specific needs.
We understand that the safety of your plant and people is paramount to you, especially if part of your process is making milk powder. Discover how ProDetec is your partner in safety
Applications
Measuring turbidity is important for ensuring the quality of the final product, but also for monitoring and controlling individual process steps in the beverage and food industries. With a reliably measured turbidity value obtained during liquid analysis, you can sustainably increase the efficiency of your process
TurBiScat
The Sigrist TurBiScat monitors turbidity in liquids. Depending on your application, The TurBiScat can monitor turbidity at 90° and/or 25° using the highly accurate scattered light principle. There is an additional option of measuring Colour at a 430nm wavelength to monitor beer colour in EBC.
The combination of Hastelloy and sapphire in a seal-less design allows operating the unit in practically all process applications. Window fouling is monitored, compensated and can be checked using an anti-fouling control. Calibration is performed easily and at lab values of accuracy using a secondary reference standard.
TurbiGuard
The brewing, wine, sugar and beverage industries have the Sigrist TurbiGuard specifically designed for monitoring medium to high turbidity, in hygienic process liquids. The TurbiGuard measures turbidity using the absorption method and is typically mounted inline using a Varivent connection. The focus of the TurbiGuard is for easy installation and extremely low maintenance. There are no seals to replace and the calibration only requires a zero setting.
LabScat
The LabScat monitors turbidity in liquids. Depending on your application, we can offer 90°/25° scattered light measurement with the option of Colour at a 430nm wavelength. The combination of Hastelloy and sapphire in a seal-less design allows operating the unit in practically all process applications. Turbidity measurement is done with colour compensation. Window fouling is monitored, compensated and can be checked using an anti-fouling control. Calibration is easy and very accurate with a precision optical calibration check cell, specific to each instrument.
AquaScat 2
The AquaScat measures turbidity of potable, recycled and raw water according to IEC 27027 using 90° scattered light detection in a non-contact, free-falling water stream. This contactless design eliminates window fouling and eliminates the need for regular maintenance (other than an annual filter change).
Calibration is performed either automatically (AquaScat WTMA) or manually (AquaScat TWM or HT) with a calibration checking unit specific to that instrument.
With a range of 0-4,000NTU, the AquaScat is sensitive enough to be used for post-filtration potable water to a heavy rain event raw water. There are 8 pre-set 4-20mA measuring ranges in the AquaScat, but any of these can be easily modified to suit your specific purpose (see the AquaScat video on setting your own measuring range).
SICON
The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.
The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.
The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.
Colour is an important parameter not only to ensure the quality of the final product, but also for monitoring and controlling individual process steps in the beverage and food industries.
ColorPlus 2
Knowing the organic load of your raw water and the colour staining of your raw water intake can provide a feed-forward element of control to your water treatment process to optimise the treatment process and save money.
Until now, measuring the dissolved organics and colour required an expensive system. With the Sigrist ColorPlus the upfront cost is low enough so that your ROI is going to be much higher, much sooner.
The ColorPlus measures the colour by absorption online using up to three different wavelengths. The bypass measuring cell has been specifically designed for applications within the water industry. Depending on the configuration you select, it allows measuring DOC (UV absorption) and colour (Hazen) simultaneously while compensating for turbidity, which would otherwise influence the results
SICON
The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.
The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.
The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.
Precise density velocity sensors are used for determination of densities and concentrations (e. g. of acids or caustics). The sensor can be used for instance for phase detection.
SonaTec
SONATEC is a highly precise sound velocity sensor for determination of sound velocities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.
RhoTec
RHOTEC is a highly precise density sensor for determination of densities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.
CombiTec
COMBITEC is used for 3-component solutions to measure simultaneously density, sound velocity and concentration e. g. in a mixture of acid and salt in water or in systems such as sulfuric acid/oleum or methanol/formaldehyde.
RhoTec L
RHOTEC L is a highly precise sensor for determination of densities and concentrations (e. g. of extract, alcohol, sugar, acids, caustics, and solvents) according to the oscillating U-tube principle. The samples are manually injected into the sensor. The instrument is designed for laboratory applications requiring maximum sensitivity and highest accuracy.
Brix is the measurement in percentage by weight of sucrose in pure water solution. This designation of Brix degrees is only valid for pure sucrose solutions. Pure sucrose is extracted from sugar-cane or sugar-beet.
Brix Monitor
Accurate monitoring of inline sugar concentration
The Centec Brix Monitor provides highly accurate monitoring of inline sugar concentration. The °Brix value of sugar syrups, soft drinks and fruit juice is performed by using either density using the RhoTec analyser or sound velocity, using the Centec SonaTec.
When installed inline, the Brix Monitor provides virtually maintenance-free and a built-in operator interface.
An automatic phase separation takes over the control and monitoring of phase transitions during a product change. This guarantees process reliability and thus improves profitability.
PhaseGuard
The PhaseGuard monitors phase change of product with water, yeast or CIP transitions by methods of turbidity or colour. The three models of the PhaseGuard cover most the possible applications: phase switch for turbidity (model T), for high turbidity (model HT) or based on of the products (model C).
The PhaseGuard is factory adjusted with a universal measuring range based on absorption. For simple applications and system integration the instrument configuration and communication can be easily done using the serial interface in the instrument itself. combination with the existing outputs. For local monitoring and control, the optional control unit SICON with touch screen technology and colour display can be connected.
SICON
The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.
The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.
The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.
SonaTec
SONATEC is a highly precise sound velocity sensor for determination of sound velocities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.
RhoTec
RHOTEC is a highly precise density sensor for determination of densities and concentrations (e. g. of acids, caustics, emulsions or solvents). The sensor can be used for instance for phase detection and for monitoring of crystallization processes.
Where more stringent hygienic standards apply, sterilization-in-place (SIP) is done after CIP cleaning. SIP kills harmful microorganisms that may have survived CIP or in cases where Cleaning-in-Place is not performed.
Sterilization in Place
Where more stringent hygienic standards apply, sterilization-in-place (SIP) is done after CIP cleaning. SIP kills harmful microorganisms that may have survived CIP or in cases where Cleaning-in-Place is not performed.
The purpose of Cleaning-in-Place (CIP) is to remove product residues and microorganisms from all wetted surfaces inside tanks, pipework and filling machines. Centec provide CIP skids for cold and hot cleaning in brewery industry.
Cleaning in Place
The purpose of Cleaning-in-Place (CIP) is to remove contaminations from wetted surfaces inside tanks, pipework and filling machines. A CIP cycle consists of various steps, e. g. pre-rinse with water, flushes with caustics and acid solutions, intermediate and final rinse with water.
High Gravity Blending (HGB) is a process that allows producing different beers (brands) from one or few mother beers. Brewery productivity is thereby maximized for a comparatively small brew house capacity and a low number of fermentation tanks.
Blender
High Gravity Blending
High Gravity Blending (HGB) is an innovative process that allows producing different beers (brands) from one or few “mother beers”. Brewery productivity is thereby maximized for a comparatively small brew house capacity and a low number of fermentation tanks.
CarboBlender
Carboblending combines High Gravity Blending (HGB) and carbonation in one step and allows producing different beers (brands) from one or few “mother beers”. Brewery productivity is thereby maximized for a comparatively small brew house capacity and a low number of fermentation tanks.
One of the main risks in a spray dryer is material build-up inside the dryer. Over time, this material will over-dry and can start to smoulder. If this smouldering fire continues without detection, a fire can break out.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Quick Suppression System
A complete system designed for extremely quick detection and suppression of fires can be used for spot protection of any type of high risk area and can be combined with Firefly’s unique Spark Detection System.
Measure the ambient dust concentration trends in a factories to manage explosion risk and improve worker safety.
DumoPro Continuous Ambient Air Dust Monitor
New and improved continuous ambient air dust monitor for industrial environments.
Low maintenance real-time 24/7 trend monitoring in key areas to detect and alarm of dust events with fast response to changes in process conditions, the DumoPro utilises Sintrol’s proven measuring technology
Wireless Solutions
In addition to our measurement devices, Sintrol’s Wireless Monitoring System makes it easier to connect, track, manage and control a network of dust monitors. Using any combination of Sintrol’s dust monitors, the entire system can be integrated and set up via our RF network and managed with our DustLog 8 software.
DustLog8
DustLog 8 is the premier central management solution for dust measurement equipment.
It gives plant operators full control over the network of dust monitors with efficient parameterising, reporting and networking functions on an easy to use interface. By unifying all of Sintrol’s latest technology into one management tool, DustLog 8 brings not only greater convenience and usability, but also improves plant efficiency, network management and worker safety for the end user.
The DustLog 8 PC software can be connected via a network router to the dust monitors. RS485, Modbus and RF are supported
During truck unloading the product can get charged electrostatically. This way the truck itself will be charged up, too (if the product is charged negatively, the truck will have a positive load). As a truck has a relatively large electric capacity, this may lead to very powerful spark discharges.
TES01 Truck Earthing System
Loading and unloading of tanker trucks with liquids or powders can generate static electricity that could cause sparks discharging. The Stuvex TES01-V2 earthing verification system has been designed to detect a low electrical resistance between the clamp jaws that are attached to the truck’s earthing point.
S604 and S804 Static Discharge Systems
An electrostatic charge can be generated while handling conductive liquids or powders. A resistive system (S604) recognises the low conductive resistance of the object and of fixed installations. It is meant for general use with barrels, carts, metal objects. Uncontrolled electrostatic discharge when filling or unloading big bags is a frequent source of ignition. The earthing Control System (S804) recognises the conductivity of an FIBC (Big Bag) type C.
RSV Fast Shutting Gate Valve
RSV fast shutting gate valves prevent propagation of dust explosions by blocking the shock wave and flame. RSV fast shutting gate valves are active valves closing in a matter of milliseconds when triggered by a spark or explosion detector.
Dust explosions can occur frequently in industrial processes where combustible material is transported/ pneumatically or mechanically conveyed, heated, filtered, spray dried, milled and store
StuVent Explosion Venting
The oldest and most frequently used explosion protection technique is explosion venting. That means that weak points are deliberately introduced in the equipment in a controlled way. In case of an explosion, these weak points will open, and the explosion pressure is released. It is not easy to calculate and correctly position the right venting surface.
VENTEX Passive Isolation Valve
Ventex explosion isolation valves prevent propagation of dust explosions by blocking the shock wave and flame front. Ventex valves are passive valves meaning they will close without requiring any external input.
RSV Fast Shutting Gate Valve
RSV fast shutting gate valves prevent propagation of dust explosions by blocking the shock wave and flame. RSV fast shutting gate valves are active valves closing in a matter of milliseconds when triggered by a spark or explosion detector.
NOVEX Passive Explosion Isolation Flap Valve
The NOVEX series is a protective system consists of passive non-return flap valves for the explosion isolation of combustible dust. The main application for the NOVEX valves is for explosion isolation on pipelines at inlet of dedusting filters operating under vacuum and protected by autonomous explosion vent panels.
Flash Explosion Suppression System
Based on the Flash explosion suppression system and operating in a similar manner, Flash chemical barriers are capable of detection an explosion in an early stage by means of pressure or flame detectors.
Flame Catcher
In case of an explosion, the Flame Catcher prevents flames from propagating beyond the Flame Catcher.
Audible, Visual Sounders and Sirens are used for alert and alarm purposes in the process, mining and industrial applications
BExS110 Ex d Alarm Horn – Radial Omni-directional
The flameproof BExS110 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards.
The BExS110-R is an alarm sounder featuring a radial omni-directional horn that disperses the alarm tones radially. Ideal for applications requiring a compact audible signalling solution.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.
A105N Alarm Sounder
The A105N is a high output, 112dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A105N is MED approved.
Low current consumption and high SPL in a robust fire retardant IP66 housing ensure the A105N is suitable for all general signalling applications including fire, security and process control.
A100 Alarm Sounder
The A100 is a compact, high output, 104dB(A) alarm sounder. CPR complaint, EN54-3 tested and UL approved. Featuring 32 alarm tone frequencies and 3 remotely activated stages/channels.
Low current consumption and high SPL in a robust fire retardant housing ensure the A100 is suitable for all general signalling applications including fire, security and process control. The A100 is a member of the versatile AlertAlarm family of industrial alarm horn sounders – also available with Xenon, AL100X or LED beacons, AL100H.
A112N Alarm Sounder
The A112N is a high output, 119dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A112N is MED approved.
High SPL in a robust fire retardant IP66 housing ensure the A112N is suitable for all general signalling applications including fire, security and process control.
A121 Alarm Sounder
The A121 is a very high output, 126dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use.
High SPL in a robust, fire retardant IP66 housing ensure the A121 is suitable for all general signalling applications including fire, security and process control.
A131 High Level Audible Warning System
The A131 is a high output 131dB(A) @ 1 metre electronic siren in a compact and easy to install package. Using up to four speakers, it can be mounted in a variety of ways for applications with sound coverage requirements up to 300m.
The A131 modular system is ideal as a plant alarm to cover outdoor locations, areas with high background noise or smaller COMAH (Seveso II) applications. Offering a choice of three alarm stages, selected from a choice 45 tones including many national standard tones, it can be incorporated in fire, security and general alarm systems where existing equipment is not powerful enough or the system needs expanding.
A141 High Level Audible Warning System 141dB(A)
The A141 is the latest in a new generation of high output electronic sounders from E2S which are ideal for wide area and disaster warning applications requiring sound coverage up to 750m.
With a choice of 45 standard warning tones including many international signals the A141 is also available in a ‘Stage Programmable’ version which can offer up to 4 remotely activated stages of alarm. Typical installation include COMAH (Seveso II) Alarm, Toxic Gas Release, Fire, Security, Flood Warning, Tsunami Alert and Civil Defence.
A151 High Level Audible Warning System
E2S offer a range of solutions for disaster and outdoor warning.
BExS110 Explosion Proof Alarm Horn Sounder
The flameproof BExS110 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. Available as SIL 1 and SIL 2 compliant.
Sound level outputs of up to 117dB(A) at 1 metre with a choice of 32 alarm tones and 3 remotely selectable stages.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.
Available in MED approved and SIL2 compliant versions.
For fire applications the BExS110D 24V dc siren is CPD EN89/106/EEC compliant (EN54-3 tested).
BExS120 Explosion Proof Flare Horn Alarm Sounder
The flameproof BExS120 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards.
Sound level outputs are up to 123dB(A) at 1 metre with a choice of 32 alarm tones and 3 remotely selectable stages.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.
For fire applications the BExS120D 24V dc siren is CPD EN89/106/EEC compliant (EN54-3 tested).
BExH120 ‘Hootronic’ Explosion Proof Alarm Horn
The flameproof BExH120 Hootronic Siren is suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. The BExH120 authentically reproduces the traditional sounds of electro-mechanical devices whilst providing a significantly higher level of performance and reliability.
The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way. With output levels of up to 117.5dB(A) at 1 metre the BExH120 surpasses legacy electro-mechanical devices in performance and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.
BEx Plated Assemblies
The BEx explosion proof Ex d family of alarm horn sounders, Xenon strobe and LED beacons can be configured to create sets of status lights suitable for onshore and offshore applications.
Mounted onto a stainless steel backplate, E2S can offer up to 5 different components complete with the option of Exe Junction Box to simplify installation. Status lights configurations can utilise the high power BExBGL2 LED beacon. Warning beacons utilising Xenon strobe technology – available in 5, 10, 15 and 21J outputs (up to 485 Cd) and providing effective warning in all conditions.
Manual alarm call points are designed for the purpose of raising an alarm manually once verification of a fire or emergency condition exists, by operating the push button or break glass the alarm signal can be raised.
Quality Calibration Gas Mixtures for Every Industry & Applications. ProDetec supply specialty gas for gas detection products, process gas analysis and laboratory applications. Our Ecosmart cylinder program is an environmentally friendly way to reduce waste caused by empty cylinders. We have six Ecosmart cylinder sizes and offer an easy way to return used cylinders for future use.
BExCP3-BG Break Glass Manual Call Point
The BExCP3-BG break glass manual call points are designed for the harshest of environments and approved for Zone 1, 2, 21 and 22 explosion proof hazardous areas for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).
The BEx range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium with a chromated and powder coat finish. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The break glass element features a safety membrane and is designed to snap ensuring the no glass fragments are released during activation. A hammer is available as an accessory if required by local code.
BExCP3-PB Push Button Manual Call Point
The BExCP3-PB push button manual call points are designed for the harshest of environments and approved for Zone 1, 2, 21 and 22 explosion proof hazardous areas for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).
The BEx range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium with a chromated and powder coat finish. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The BExCP3-PB is user re-settable by rotating the push button.
IS-CP4-PB Push Button Manual Call Point
The IS-CP4-PB push button manual call points are designed for the harshest of environments and approved for Zones 0, 1, 2, 21 & 22 requiring hazardous area intrinsically safe equipment for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).
The IS-CP4 range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium which is chromated and powder coated. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The IS-CP4-PB is user re-settable by rotating the push button.
GNExCP6-BG Break Glass Manual Call Point
Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The break glass element features a safety membrane and is designed to snap ensuring the no glass fragments are released during activation. A hammer is available as an accessory if required by local code.
The flameproof GNExCP6-BG break glass manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free initiation solution for harsh and hazardous applications on and offshore.
GNExCP6-PB Push Button Manual Call Point
The flameproof GNExCP6-PB push button manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free solution for initiation in harsh and hazardous applications on and offshore.
Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also available with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The GNExCP6-PB is user re-settable by rotating the push button.
GNExCP6-PT Push Button Tool Reset Call Point
The flameproof GNExCP6-PB tool reset push button manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free solution for initiation in harsh and hazardous applications on and offshore.
Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also available with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The GNExCP6-PT is user re-settable via the use of the special key supplied with the unit.
ProDetec can offer our customers innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency to protect your workers from potential gas hazards. These gas detectors can be readily calibrated and tested on site with the aid of Automated Calibration and Bump Testing Stations
Multi Gas Clip Simple Plus
No charging ever! 3 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.
Multi Gas Clip Simple
4 gas detector with 2 year runtime. No charging ever! Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for two full years.
PS200 4 Gas Monitor
The PS200 Multi Gas Detector combines quality, ruggedness, and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards.
The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications.
In addition to extensive data logging capabilities, the PS200 is available with an optional internal pump and an extensive range of accessories to meet a wide variety of user applications.
PS500 5 Gas Monitor
Designed by our customers, this robust and accurate gas detector provides unrivalled protection in confined space applications. The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.
Multi Gas Clip Infrared
The MGC IR detects combustible gases (LEL), hydrogen sulphide (H2S), carbon monoxide (CO) & oxygen (O2). The MGC IR can go a full 2 months without a charge, even without ever having to be turned off. Shut down the detector nightly and the battery can last up to 4 months.
Multi Gas Clip Pump Infrared
Like the MGC IR, the MGC IR Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC IR Pump uses an IR source which conserves power and helps the battery last and last.
MGC Simple Clip Dock
The Gas Clip Technologies MGC Simple Clip Dock is an all-in-one, stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
Single Gas Clip
Whether it’s the hottest or the coldest environment, our Single Gas Clip is designed and tested to provide worker safety in the harshest working conditions. Gases available are hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2).
Single Gas Clip Plus
The Single Gas Clip Plus, is a maintenance free handheld gas detector with built in “Hibernate” mode for detecting hydrogen sulphide (H2S) or carbon monoxide (CO). “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use.
Protege ZM Single Gas Monitor
The GMI Protege ZM Single Gas Monitor is an easy-to-use, zero maintenance gas detection solution that delivers high performance in a small, ergonomically designed package. It is available in oxygen, carbon monoxide and hydrogen sulphide single gas models. This single gas monitor is incredibly reliable, giving industrial workers and first responders the confidence to focus on the task at hand, not on their equipment.
Multi Gas Clip Dock
The Gas Clip Technologies MGC Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
MGC Pump Clip Dock
The Gas Clip Technologies MGC Pump Clip Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
Single Gas Clip Dock
Gas Clip Technologies Single Gas Clip Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.
PS200 ABC Station
The multi-functional Auto Bump/Calibration station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit.
PS500 ABC Station
To provide accurate performance and results, the PS500 has to be properly used and maintained. The Auto Bump & Calibration Station (ABC) provides bump testing, calibration and data management options and is compact, robust and intuitive to use.
At ProDetec we can supply specialised gases and gas mixtures to meet various and specific requirements. We work with you to understand your application and analyse your consumption patterns. This way we can offer the correct cylinder size that maximises your efficiency while minimising costs.
44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 44 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 66 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder
Disposable cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures
Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Warranty on these gases is 48 months.
116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 116 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
Regulators and Accessories
Regulators for non-refillable cylinders are available in a number of different configurations including fixed flow, push button, on-demand flow and variable flow models.
Gas Recycling Program
Once the calibration gas cylinders are relieved of pressure they are NOT considered hazardous material or waste. Nearly all of our mixtures contain only a very small amount of a hazardous chemical(s) as a minor component in the gas mixture requested. The fact that it is such a small amount (usually in the ppm range) always precludes the gas mixture from ever being classified as hazardous.
Our calibration gas cylinder recycling program is an environmentally-friendly way to reduce waste caused by empty cylinders. We offer a free, easy way to return used cylinders for future use.
