- Industries
- Shipping
Shipping
More and more goods are transported by sea on a global scale and cruise liners are also enjoying an increase in popularity. For economic reasons, many ship operators choose heavy fuel oil as a propellant. The International Maritime Organization (IMO) has issued guidelines for limiting pollutant emissions of heavy fuel oil powered ships. In order to continue an operation with highly sulphurous heavy fuel oil, the ships are refitted with scrubber.
Applications
More and more goods are transported by sea on a global scale and cruise liners are also becoming increasingly popular. For economic
reasons, many ship operators choose the cheap but highly polluting heavy oil as a propellant.
ScrubberGuard
To meet the challenges of maritime shipping, SIGRIST combines established individual components in an innovative all-in-one system – complemented by unique maritime refinements!
Oil Trace Monitor for oil discharge monitoring
ScrubberGuard
To meet the challenges of maritime shipping, SIGRIST combines established individual components in an innovative all-in-one system – complemented by unique maritime refinements!
OilGuard 2W
The instrument is used for monitoring oil traces in raw, surface run-off, process and wastewater. As a result of the non-contact (free-fall) measurement, there is no drift in readings as a result of window fouling. Another benefit of this design feature is the extremely low need for maintenance. This instrument is for non-hazardous applications.
No external operator interface is required as the colour touch-pad is integral to the analyser.
If the environment is hazardous, please refer to the OilGuard Ex
The turbidity value is important for the assessment of water quality and as an indicator of the effectiveness of the water treatment. By continuously measuring the turbidity of water, resources for water treatment can be better targeted. This will minimise your maintenance efforts and reduce the cost of treatment substances.
AquaScat 2
The AquaScat measures turbidity of potable, recycled and raw water according to IEC 27027 using 90° scattered light detection in a non-contact, free-falling water stream. This contactless design eliminates window fouling and eliminates the need for regular maintenance (other than an annual filter change).
Calibration is performed either automatically (AquaScat WTMA) or manually (AquaScat TWM or HT) with a calibration checking unit specific to that instrument.
With a range of 0-4,000NTU, the AquaScat is sensitive enough to be used for post-filtration potable water to a heavy rain event raw water. There are 8 pre-set 4-20mA measuring ranges in the AquaScat, but any of these can be easily modified to suit your specific purpose (see the AquaScat video on setting your own measuring range).
ScrubberGuard
To meet the challenges of maritime shipping, SIGRIST combines established individual components in an innovative all-in-one system – complemented by unique maritime refinements!
Oil mist detection serves to monitor the often unmanned machine and hydraulic rooms on tankers, LNG ships, etc.
VisGuard
The Sigrist VisGuard is your partner in the safety and monitoring of road and rail tunnels. To ensure safety in a critical tunnel application you need to have dependable information on
- Visibility measurement
- Ventilation control
- Early fire/smoke detection in road and rail tunnels
- Dust concentration in air
- Detection of oil mist
Visibility, CO concentration, and sometimes NO concentration are vital criteria for assessing air quality in road tunnels. These parameters are used for controlling the ventilation system in order to minimise energy consumption and also for closing down the tunnel whenever pre-established safety limits are exceeded.
The VisGuard is available in different versions: In-situ, Extractive or Mini-extractive Installation
ProDetec has access the the worlds best gas detectors for a wide range of industries. Whether the need is for a single application or multiple sites and areas, our durable gas monitoring solutions meet your unique industrial needs. We offer a broad range of gas detectors and controllers to satisfy international certification standards such as SIL (Safety Integrity Level)
GD10P Hydrocarbon Infra Red Point Gas Detector
The Simtronics GD10P detector is the benchmark for combustible gas detection for offshore oil and gas installations. It has set the standard for gas detectors in the areas of safety, stability and low maintenance both onshore & offshore.
The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.
These IR gas detectors differ from all other models, because they utilise silicon based solid-state IR sources. The complete opto-mechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
We offer the longest combined detector and IR source warranty on the market.
For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using cabling and control modules.
iTrans2 Gas Detector
The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance, and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up, or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.
OLCT100 Gas Detector
Designed for the detection of explosive gases, toxic gases or oxygen, this combustible gas detector comes with Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application ProDetec offers a solution: catalytic, electrochemical, semiconductor, or poison control version. IEC Ex approved, these detectors are available in explosion safe or intrinsically safe versions. SIL 2 certified according to EN 50402.
CTX300 Gas Detector
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol.
OLCT10 Gas Detector
Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapours in ambient air. Easy to install and operate, these detectors combined with the MX 32 control unit meet demanding user requirements.
OLCT10N Gas Detector
Digital combustible detector for oxygen, toxic or combustible gases.
The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.
MX32 Multi Channel Controller
The new MX 32, a controller that takes analog & digital inputs and covers all needs for a wide variety of applications. The MX 32 is a compact, low-profile controller that continuously monitors gas detection and more generally any 4-20 mA, MODBUS RS485 signal from compatible detectors.
MX43 SIL-1 Certified Gas Detection Controller
SIL-1 Certified MX 43 is a Flexible, High Quality, Easy to Use Gas Detection System
Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings.
MX52 2- 16 Channel Gas Detection Controller
The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact requirements.
ProDetec can offer our customers innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency to protect your workers from potential gas hazards. These gas detectors can be readily calibrated and tested on site with the aid of Automated Calibration and Bump Testing Stations
ShipSurveyor
The ShipSurveyor was designed after extensive consultation with shipowners, ship managers and shipping personnel. The result is a range of 8 instruments dedicated to the marine market.
The ShipSurveyor is versatile yet simple to use. The feature-rich range of instruments are suitable for all marine applications including confined space monitoring, cargo monitoring and inerting.
Up to 5 gases can be simultaneously measured and displayed. The hydrocarbon range, which utilises the latest infrared technology, can be calibrated with Butane, Propane or Methane, depending on application.
PS500 5 Gas Monitor
Designed by our customers, this robust and accurate gas detector provides unrivalled protection in confined space applications. The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.
PS500 CO2 Gas Monitor
The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.
PS200 4 Gas Monitor
The PS200 Multi Gas Detector combines quality, ruggedness, and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards.
The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications.
In addition to extensive data logging capabilities, the PS200 is available with an optional internal pump and an extensive range of accessories to meet a wide variety of user applications.
Multi Gas Clip Simple Plus
No charging ever! 3 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.
Multi Gas Clip Simple
4 gas detector with 2 year runtime. No charging ever! Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for two full years.
Multi Gas Clip Infrared
The MGC IR detects combustible gases (LEL), hydrogen sulphide (H2S), carbon monoxide (CO) & oxygen (O2). The MGC IR can go a full 2 months without a charge, even without ever having to be turned off. Shut down the detector nightly and the battery can last up to 4 months.
Multi Gas Clip Pump Infrared
Like the MGC IR, the MGC IR Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC IR Pump uses an IR source which conserves power and helps the battery last and last.
Single Gas Clip
Whether it’s the hottest or the coldest environment, our Single Gas Clip is designed and tested to provide worker safety in the harshest working conditions. Gases available are hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2).
Single Gas Clip Plus
The Single Gas Clip Plus, is a maintenance free handheld gas detector with built in “Hibernate” mode for detecting hydrogen sulphide (H2S) or carbon monoxide (CO). “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use.
Protege ZM Single Gas Monitor
The GMI Protege ZM Single Gas Monitor is an easy-to-use, zero maintenance gas detection solution that delivers high performance in a small, ergonomically designed package. It is available in oxygen, carbon monoxide and hydrogen sulphide single gas models. This single gas monitor is incredibly reliable, giving industrial workers and first responders the confidence to focus on the task at hand, not on their equipment.
MGC Simple Clip Dock
The Gas Clip Technologies MGC Simple Clip Dock is an all-in-one, stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
Multi Gas Clip Dock
The Gas Clip Technologies MGC Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
MGC Pump Clip Dock
The Gas Clip Technologies MGC Pump Clip Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.
Single Gas Clip Dock
Gas Clip Technologies Single Gas Clip Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.
PS200 ABC Station
The multi-functional Auto Bump/Calibration station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit.
PS500 ABC Station
To provide accurate performance and results, the PS500 has to be properly used and maintained. The Auto Bump & Calibration Station (ABC) provides bump testing, calibration and data management options and is compact, robust and intuitive to use.
At ProDetec we can supply specialised gases and gas mixtures to meet various and specific requirements. We work with you to understand your application and analyse your consumption patterns. This way we can offer the correct cylinder size that maximises your efficiency while minimising costs.
44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 44 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 66 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder
Disposable cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures
Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Warranty on these gases is 48 months.
116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder
Recyclable 116 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.
Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2
Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.
Regulators and Accessories
Regulators for non-refillable cylinders are available in a number of different configurations including fixed flow, push button, on-demand flow and variable flow models.
Gas Recycling Program
Once the calibration gas cylinders are relieved of pressure they are NOT considered hazardous material or waste. Nearly all of our mixtures contain only a very small amount of a hazardous chemical(s) as a minor component in the gas mixture requested. The fact that it is such a small amount (usually in the ppm range) always precludes the gas mixture from ever being classified as hazardous.
Our calibration gas cylinder recycling program is an environmentally-friendly way to reduce waste caused by empty cylinders. We offer a free, easy way to return used cylinders for future use.
