- Industries
- Tissue Manufacturing
Tissue Manufacturing
Applications
Yankee Dryer and Drive Side Protection
Due to the large amount of dust accumulation around the Yankee Hood, Yankee Dryer and the Drive Side of the machine, the risk of fire in these areas is considered very high.
Firefly’s Quick Suppression System that combine advanced and reliable flame detectors with water mist suppression nozzles will be located to cover the risk zones around the Yankee Dryer.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Quick Suppression System
A complete system designed for extremely quick detection and suppression of fires can be used for spot protection of any type of high risk area and can be combined with Firefly’s unique Spark Detection System.
Firefly Fast Water Mist Systems
Firefly PowerImpact™ extinguishing is used in process ducts and chutes, it has a unique design spraying from different directions into a chute or duct utilising Full cone spray nozzles. Large water droplets for more momentum and penetration with a minimum of three water nozzles and solenoid valves per zone. Each water nozzle uses a Quick-connection and flexible hose that makes it easy to test the system without releasing water into the process
Firefly Water Mist Suppression Systems have remarkable flame suppression capabilities, utilising a small amount of water. The unique design of the hydraulic system enables a very quick system response time.
One of the most common areas for fires is in and around the Doctor Blade area. Friction created by Doctor Blades in combination with and accumulation of dust can cause fires which can spread rapidly.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Quick Suppression System
A complete system designed for extremely quick detection and suppression of fires can be used for spot protection of any type of high risk area and can be combined with Firefly’s unique Spark Detection System.
Firefly Fast Water Mist Systems
Firefly PowerImpact™ extinguishing is used in process ducts and chutes, it has a unique design spraying from different directions into a chute or duct utilising Full cone spray nozzles. Large water droplets for more momentum and penetration with a minimum of three water nozzles and solenoid valves per zone. Each water nozzle uses a Quick-connection and flexible hose that makes it easy to test the system without releasing water into the process
Firefly Water Mist Suppression Systems have remarkable flame suppression capabilities, utilising a small amount of water. The unique design of the hydraulic system enables a very quick system response time.
Firefly WebScan System
Friction at the Doctor Blade and smouldering particles from the Yankee Dryer can create dangerous ignition sources such as hot, dark particles and glowing embers.
To prevent fire in stored parent roles, Firefly has developed the WebScan. The system consists of True IR Spark Detectors mounted above the tissue sheet between the Yankee Dryer and the Reel-Up.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Reel Up Area Protection
Dust build up and tissue debris occurs in this area and is very combustible.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Quick Suppression System
A complete system designed for extremely quick detection and suppression of fires can be used for spot protection of any type of high risk area and can be combined with Firefly’s unique Spark Detection System.
Firefly Fast Water Mist Systems
Firefly PowerImpact™ extinguishing is used in process ducts and chutes, it has a unique design spraying from different directions into a chute or duct utilising Full cone spray nozzles. Large water droplets for more momentum and penetration with a minimum of three water nozzles and solenoid valves per zone. Each water nozzle uses a Quick-connection and flexible hose that makes it easy to test the system without releasing water into the process
Firefly Water Mist Suppression Systems have remarkable flame suppression capabilities, utilising a small amount of water. The unique design of the hydraulic system enables a very quick system response time.
Dust Extraction Protection
To reduce the dust accumulation and keep the tissue web clean from dust some machines are equipped with dust extraction systems. Firefly True IR Spark Detectors and Water Mist Nozzles can be located in the outlet duct work for a combined reliable solution.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Fast Water Mist Systems
Firefly PowerImpact™ extinguishing is used in process ducts and chutes, it has a unique design spraying from different directions into a chute or duct utilising Full cone spray nozzles. Large water droplets for more momentum and penetration with a minimum of three water nozzles and solenoid valves per zone. Each water nozzle uses a Quick-connection and flexible hose that makes it easy to test the system without releasing water into the process
Firefly Water Mist Suppression Systems have remarkable flame suppression capabilities, utilising a small amount of water. The unique design of the hydraulic system enables a very quick system response time.
Ignition sources can be generated from the shredding process and fires will most likely occur in the cyclone or filter where the shredded material is pneumatically conveyed.
Tissue Solutions
The worst and most feared scenario is that ignition sources created by a production-related problem, such as sparks and hot particles from the Yankee Hood, are embedded within the tissue reel and transferred to the warehouse. The typical frequency of this scenario is low but when it happens, the consequences are devastating.
Firefly offers detection of sparks and suppression of flames within seconds around the Doctor Blade and Yankee dryer using a combination of the Spark Detection and Quick Suppression system with optical flame detectors that can detect small flames at an early stage, over a large area, combined with water mist suppression.
In the Log Saw enclosure it is vital to detect and suppress flames within seconds because a fire in this area can spread very quickly. Firefly’s Quick Suppression System offers a solution that combines optical UV/IR fire sensors that can detect small flames at an early stage, over a large area, with fast water mist suppression.
To avoid dust filter fires and explosions, ignition sources in the extraction system need to be detected and extinguished. By installing Firefly Spark Detection system you get extremely fast IR sensors that can detect sparks and hot particles. Depending on the process, the aim of the system is to eliminate ignition sources by extinguishing with water, using isolation and CO2, or diverting the air flow.
Firefly Spark Detection Systems
Firefly’s Spark and Hot Body Detectors are designed to detect ALL potential ignition sources such as sparks, glowing and hot particles. These detectors are insensitive to daylight minimising false alarms.
Firefly Fast Water Mist Systems
Firefly PowerImpact™ extinguishing is used in process ducts and chutes, it has a unique design spraying from different directions into a chute or duct utilising Full cone spray nozzles. Large water droplets for more momentum and penetration with a minimum of three water nozzles and solenoid valves per zone. Each water nozzle uses a Quick-connection and flexible hose that makes it easy to test the system without releasing water into the process
Firefly Water Mist Suppression Systems have remarkable flame suppression capabilities, utilising a small amount of water. The unique design of the hydraulic system enables a very quick system response time.
