Water

We understand that you need to meet increasingly tighter water standards, coupled with protecting your people and the health of the community. You have told us that you need to spend less time on maintenance to have dependable critical values. ProDetec has you covered with ground breaking technology. From maintenance-free turbidity to having a 24/7 bacterial watchdog, we are here to help you meet your targets and protect the communities you serve.

There are many different aspects to the complex and essential industry called “Water”. Let’s have a look at a few that you can find inside the ProDetec website.

Applications

Optimise the control of your water treatment process with non-contact and thus maintenance-free turbidity measurement. Continuous measurement of the turbidity of water after the filtration systems assists you in monitoring the effectiveness of the filtration step and in detecting any filter breakthroughs.

Sigrist AquaScat 2

AquaScat 2

The AquaScat measures turbidity of potable, recycled and  raw water according to IEC 27027 using 90° scattered light detection in a non-contact, free-falling water stream. This contactless design eliminates window fouling and eliminates the need for regular maintenance (other than an annual filter change).

Calibration is performed either automatically (AquaScat WTMA) or manually (AquaScat TWM or HT) with a calibration checking unit specific to that instrument.

With a range of 0-4,000NTU, the AquaScat is sensitive enough to be used for post-filtration potable water to a heavy rain event raw water. There are 8 pre-set 4-20mA measuring ranges in the AquaScat, but any of these can be easily modified to suit your specific purpose (see the AquaScat video on setting your own measuring range).

Sigrist AquaScat S

AquaScat S

The AquaScat measures the turbidity of potable water according to IEC 27027, with the measurement carried out through multiple process connection options such as immersion tube, in pipe (metal or PE), in vessel. There is also a retractable option which allows the AquaScat S to be withdrawn for CIP and maintenance.

Calibration is done with a checking unit that has no consumables which enable the operator to return the instrument calibration to factory calibration.

 

 

Sigrist AquaMaster

AquaMaster

AquaMaster is a compact multi-parameter measuring system providing critical information on: turbidity, pH, conductivity, Redox, dissolved oxygen and temperature. The “brains” of the AquaMaster system is the AquaScat, with the colour touch screen being the central operator control and display unit, as well as being the combined connection to the host control system. Up to 8 measuring values can be transmitted. The measuring station is delivered pre-assembled. The AquaMaster then requires only power and the connection of water inlet and water outlet, then … Measure!

Optical colour measurement detects contamination such as suspended solids, dissolved organic carbon, humic substances, bacteria etc. The colour number in Hazen is often used as an indicator of the degree of contamination.

Sigrist ColorPlus 2

ColorPlus 2

Knowing the organic load of your raw water and the colour staining of your raw water intake can provide a feed-forward element of control to your water treatment process to optimise the treatment process and save money.

Until now, measuring the dissolved organics and colour required an expensive system. With the Sigrist ColorPlus the upfront cost is low enough so that your ROI is going to be much higher, much sooner.

The ColorPlus measures the colour by absorption online using up to three different wavelengths. The bypass measuring cell has been specifically designed for applications within the water industry. Depending on the configuration you select, it allows measuring DOC (UV absorption) and colour (Hazen) simultaneously while compensating for turbidity, which would otherwise influence the results

Sigrist SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

DOC measurement after activated carbon filtration gives information on the saturation of the activated carbon. This DOC measurement enables you to regenerate the activated carbon in time. On-line monitoring of the DOC at the outlet of the water works usually has an alarm function and helps to ensure process safety.

Sigrist ColorPlus 2

ColorPlus 2

Knowing the organic load of your raw water and the colour staining of your raw water intake can provide a feed-forward element of control to your water treatment process to optimise the treatment process and save money.

Until now, measuring the dissolved organics and colour required an expensive system. With the Sigrist ColorPlus the upfront cost is low enough so that your ROI is going to be much higher, much sooner.

The ColorPlus measures the colour by absorption online using up to three different wavelengths. The bypass measuring cell has been specifically designed for applications within the water industry. Depending on the configuration you select, it allows measuring DOC (UV absorption) and colour (Hazen) simultaneously while compensating for turbidity, which would otherwise influence the results

Sigrist SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

Nitrate is the main source of nitrogen for plants. When the soil is heavily farmed nitrogen fertilisers are used. Other sources are as are septic systems, wastewater treatment plants, dairies and natural conditions. Excess nitrogen can lead to the growth of algae which can clog water intakes and use up dissolved oxygen which then kills fish kills and deprive water sources of oxygen. There are reports of Nitrates in drinking water being harmful to humans, particularly young children, and being potentially carcinogenic.

Sigrist ColorPlus 3 Nitrate

ColorPlus 3 Nitrate

Nitrate is one of the most common groundwater contaminants in rural areas. Higher nitrate levels can pose a direct threat to health, but they also indicate the possible presence of other more serious contaminants, such as bacteria or pesticides.  Nitrate in groundwater originates primarily from fertilizers, septic systems, and manure storage or agricultural spreading operations.

The Sigrist ColorPlus 3 offers you online measurement of nitrate. We use a long-life xenon flash lamp is which offers a well-defined light spectrum over the wavelengths we require with a very low loss of intensity.

Sigrist BactoSense

BactoSense

This automatic flow cytometer has been specially developed according to the needs of the water industry for the microbiological monitoring of drinking water. The BactoSense does not and cannot replace your Laboratory. Rather it is a tool to be used for very rapid response to a bacterial outbreak or even for a sensitive change to the bacterial profile(Sigrist call it your “finger print)”of a part of your water treatment process, and other important applications. For example it can be online 24/7monitoring the outlet of your WTP. If an aberration is detected, samples can be brought to the BactoSense to determine the location of the bacterial incident. Similarly, because of its portability, the BactoSense can be taken to remote parts of your distribution network for a spot check, as well as your recycled water plant….even Council swimming pools.

 

Optimise your ozonization process by continuously monitoring the ozone content using our ozone monitor. With this control option, you can ensure optimal disinfection and thereby improve the economic efficiency of the process. Any residual ozone in the exhaust air must be decomposed by catalysts or by thermal treatment. Measuring ozone at the outlet of the residual ozone destructor ensures that the legal requirements regarding residual ozone concentration are observed.

Sigrist ColorPlus 2 03 Water and Gas

ColorPlus 2 03 Water and Gas

The ColorPlus O3 analyuser can be setup to measure ozone in either gases or ultra-pure water. Let’s have a brief overview of both versions.

Measuring Ozone O3 in Water: The Sigrist ColorPlus 2 O3 Ozone meter for ultra-pure water measures the ozone concentration at a wavelength of 254nm according to standard DIN 19627 and the IOA (International Ozone Association). This instrument has a special measuring cell with a path-length of 100mm which allows measuring ozone in ultra pure water in the ppb range.

Measuring Ozone for Gases measures the ozone concentration according to standard DIN 19627 and the IOA at a wavelength of 254nm. According to these standards, the extinction coefficient is 3024 l/mol cm. Therefore, the ozone measurement can be regarded as an absolute measurement requiring no calibration with ozone.

Sigrist SICON

SICON

The control unit SICON uses state-of-the-art touch screen technology with colour display. It allows simple operation using logical menu guidance. The user can select how results are displayed, either as plain values, graphs or historical data, including the indication of system and alarm status.

The control unit SICON offers all possibilities of full system integration using various interface options. A SD card is standard and can be used for data logging with almost unlimited storage capacity.

The SICON is available as a control unit for a single instrument, or the SICON M Control Unit which allows simple operation of several instruments up to a maximum of 8 measuring channels.

Multi-Parameter Measuring System for Water Treatment Works

Sigrist AquaMaster

AquaMaster

AquaMaster is a compact multi-parameter measuring system providing critical information on: turbidity, pH, conductivity, Redox, dissolved oxygen and temperature. The “brains” of the AquaMaster system is the AquaScat, with the colour touch screen being the central operator control and display unit, as well as being the combined connection to the host control system. Up to 8 measuring values can be transmitted. The measuring station is delivered pre-assembled. The AquaMaster then requires only power and the connection of water inlet and water outlet, then … Measure!

ProDetec has access the the worlds best gas detectors for a wide range of industries.  Whether the need is for a single application or multiple sites and areas, our durable gas monitoring solutions meet your unique industrial needs. We offer a broad range of gas detectors and controllers to satisfy international certification standards such as  SIL (Safety Integrity Level), Marine, IECEx.

Simtronics GD10P Hydrocarbon Infra Red Point Gas Detector

GD10P Hydrocarbon Infra Red Point Gas Detector

The Simtronics GD10P detector is the benchmark for combustible gas detection for offshore oil and gas installations. It has set the standard for gas detectors in the areas of safety, stability and low maintenance both onshore & offshore. 

The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. 

These IR gas detectors differ from all other models, because they utilise silicon based solid-state IR sources. The complete opto-mechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs. 

We offer the longest combined detector and IR source warranty on the market. 

For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using cabling and control modules. 

Simtronics GD10P

Oldham OLCT100 Gas Detector

OLCT100 Gas Detector

Designed for the detection of explosive gases, toxic gases or oxygen, this combustible gas detector comes with Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application ProDetec offers a solution: catalytic, electrochemical, semiconductor, or poison control version. IEC Ex approved, these detectors are available in explosion safe or intrinsically safe versions. SIL 2 certified according to EN 50402.

Oldham iTrans 2 Gas Detector

iTrans 2 Gas Detector

The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance, and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up, or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

Simtronics GD10P CO2 Gas Detector

GD10P CO2 Gas Detector

 The Infrared (IR) gas detectors differ from all other models, because they utilise silicon based solid-state infrared sources. The complete opto-mechanical design construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
The Simtronics GD10 Series of gas detector offers the longest combined detector and IR source warranty on the market: 5 years warranty & 15 years on IR sources.

Oldham CTX300 Gas Detector

CTX300 Gas Detector

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. 

Oldham OLCT10 Gas Detector

OLCT10 Gas Detector

Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapours in ambient air. Easy to install and operate, these detectors combined with the MX 32 control unit meet demanding user requirements.

Oldham OLCT10N Gas Detector

OLCT10N Gas Detector

Digital combustible detector for oxygen, toxic or combustible gases.

The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.

Oldham MX32 Multi Channel Controller

MX32 Multi Channel Controller

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. 

Oldham MX43 SIL-1 Certified Gas Detection Controller

MX43 SIL-1 Certified Gas Detection Controller

SIL-1 Certified MX 43 is a Flexible, High Quality, Easy to Use Gas Detection System 

Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings. 

Oldham MX52 2- 16 Channel Gas Detection Controller

MX52 2- 16 Channel Gas Detection Controller

The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact requirements.

Detecting the right flame for the right application is critical when protecting your plant or process from Fire. Different fires require different technologies to accurately detect them, Whether it be UV, UV/IR, Single IR, IR3 or Intelligent Visual Flame technologies, ProDetec can offer expertise in selecting the correct detection method.

Simtronics DF-TV7 IR3 Flame Detector (SIL3)

DF-TV7 IR3 Flame Detector (SIL3)

The MultiFlame DF-TV7–T is a multi-spectrum infrared flame detector using three wavelengths. The MultiFlame DF-TV7-T responds to hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires.  

Micropack FDS303 Multi Spectrum IR Flame Detector

FDS303 Multi Spectrum IR Flame Detector

Designed for hazardous industries where fast fire detection is critical and nuisance alarms are not an option!

The MICROPACK FDS303 is an explosion-proof multi-spectrum IR flame detector. The device delivers superior performance, responding to hydrocarbon liquid fuel and gas fires at long distances.

The FDS303 has been tested by Factory Mutual to detect a hydrocarbon fuel pan fire at 60 m (~ 200 feet) in 5 seconds.

Micropack FDS300 Intelligent Visual Flame Detector

FDS300 Intelligent Visual Flame Detector

Designed for hazardous industries where fast optical flame detection is critical and nuisance alarms are not an option!

The MICROPACK FDS300 is an explosion-proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its flame detection algorithms and on-board digital signal processing.

Micropack FDS301 Intelligent Visual Flame Detector

FDS301 Intelligent Visual Flame Detector

Designed for hazardous industries where fast optical flame detection is critical and nuisance alarms are not an option!

The MICROPACK FDS301 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its FM and SIL 2 certified flame detection algorithms and on-board digital signal processing. It is the safest and most advanced flame detector on the market today, and its installation track record in the harshest of locations around the globe has proven the instrument to be extremely robust.

ProDetec can offer our customers innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency to protect your workers from potential gas hazards. These gas detectors can be readily calibrated and tested on site with the aid of Automated Calibration and Bump Testing Stations

GMI PS500 CO2 Gas Monitor

PS500 CO2 Gas Monitor

The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.

GMI PS500 5 Gas Monitor

PS500 5 Gas Monitor

Designed by our customers, this robust and accurate gas detector provides unrivalled protection in confined space applications. The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range.

GMI PS200 4 Gas Monitor

PS200 4 Gas Monitor

The PS200 Multi Gas Detector combines quality, ruggedness, and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards. 

The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications. 

In addition to extensive data logging capabilities, the PS200 is available with an optional internal pump and an extensive range of accessories to meet a wide variety of user applications. 

GMI Protege ZM Single Gas Monitor

Protege ZM Single Gas Monitor

The GMI Protege ZM Single Gas Monitor is an easy-to-use, zero maintenance gas detection solution that delivers high performance in a small, ergonomically designed package. It is available in oxygen, carbon monoxide and hydrogen sulphide single gas models. This single gas monitor is incredibly reliable, giving industrial workers and first responders the confidence to focus on the task at hand, not on their equipment.  

Gasclip Single Gas Clip (O2, CO, H2S)

Single Gas Clip (O2, CO, H2S)

Whether it’s the hottest or the coldest environment, our Single Gas Clip is designed and tested to provide worker safety in the harshest working conditions. Gases available are hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2).

Gasclip MGC Simple Plus 3 Year

MGC Simple Plus 3 Year

No charging ever! 3 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.

Gasclip MGC Simple 2 Year

MGC Simple 2 Year

No charging ever! 2 Year runtime. Reliably test for hydrogen sulphide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for two full years.

Gasclip MGC IR

MGC IR

The MGC IR detects combustible gases (LEL), hydrogen sulphide (H2S), carbon monoxide (CO) & oxygen (O2). The MGC IR can go a full 2 months without a charge, even without ever having to be turned off. Shut down the detector nightly and the battery can last up to 4 months.

Gasclip MGC IR Pump

MGC IR Pump

Like the MGC IR, the MGC IR Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC IR Pump uses an IR source which conserves power and helps the battery last and last.

GMI PS200 ABC Station

PS200 ABC Station

The multi-functional Auto Bump/Calibration station provides simple but intelligent testing and calibration of the PS200 portable gas detector. Easy to use, with a durable, user friendly design, this automated test station offers high performance from a PC or stand-alone unit.

GMI PS500 ABC Station

PS500 ABC Station

To provide accurate performance and results, the PS500 has to be properly used and maintained. The Auto Bump & Calibration Station (ABC) provides bump testing, calibration and data management options and is compact, robust and intuitive to use.

Gasclip SGC Docking System

SGC Docking System

Gas Clip Technologies Single Gas Clip Dock (SGC Dock) is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.

Gasclip MGC Simple Docking Station

MGC Simple Docking Station

The Gas Clip Technologies MGC Simple Clip Dock is an all-in-one, stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

Gasclip MGC Docking Station

MGC Docking Station

The Gas Clip Technologies MGC Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

Gasclip MGC Pumped Docking Station

MGC Pumped Docking Station

The Gas Clip Technologies MGC Pump Clip Dock is an all-in-one stand-alone docking station designed for maximum testing efficiency and portability. It tests up to four detectors simultaneously, reducing the testing time and gas usage.

At ProDetec we can supply specialised gases and gas mixtures to meet various and specific requirements. We work with you to understand your application and analyse your consumption patterns. This way we can offer the correct cylinder size that maximises your efficiency while minimising costs.

ProDetec Calibration and Test Gas 44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

44 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 44 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

ProDetec Calibration and Test Gas 66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

66 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 66 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

ProDetec Calibration and Test Gas 103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder

103 Litre Steel Non-Reactive Single Gas Calibration Gas Cylinder

Disposable cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures

Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Warranty on these gases is 48 months.

 

ProDetec Calibration and Test Gas 105 Litre Aluminium Recyclable Reactive Single Gas Calibration Gas Cylinder

105 Litre Aluminium Recyclable Reactive Single Gas Calibration Gas Cylinder

Recyclable 105 litre cylinders available for non reactive gas mixtures, supplied with either a single gas up to three non reactive gas mixtures.

Most commonly supplied in single fills containing Argon, Benzene, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Freon, Helium, Hexane, Hydrogen, Isobutane, Isobutylene, Methane, Nitrogen, Oxygen, Pentane, Propane, Toluene in either Air or Nitrogen backgrounds. Typical Shelf life 48 months

ProDetec Calibration and Test Gas 116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

116 Litre Aluminium Recyclable Reactive Multi Mixture Calibration Gas Cylinder

Recyclable 116 litre cylinders available for reactive gas mixtures, supplied with either a single gas or a complex blend.

Most commonly supplied in 4 or 5 gas mixtures such as CH4, O2, CO, H2S with either SO2 or CO2

Also available in single fills containing H2S, NH3, PH3, HCN, HCL, SO2, NO2, NO in either air or nitrogen. Some reactive gases will have a shorter life – typically 12 months.

ProDetec Calibration and Test Gas Regulators and Accessories

Regulators and Accessories

Regulators for non-refillable cylinders are available in a number of different configurations including fixed flow, push button, on-demand flow and variable flow models.

ProDetec Calibration and Test Gas Gas Recycling Program

Gas Recycling Program

Once the calibration gas cylinders are relieved of pressure they are NOT considered hazardous material or waste. Nearly all of our mixtures contain only a very small amount of a hazardous chemical(s) as a minor component in the gas mixture requested. The fact that it is such a small amount (usually in the ppm range) always precludes the gas mixture from ever being classified as hazardous.

Our EcoSmart cylinder program is an environmentally-friendly way to reduce waste caused by empty cylinders. We have six EcoSmart cylinder sizes and offer a free, easy way to return used cylinders for future use.

Digester gas, a term with a somewhat negative connotation, has become an important component of alternative energy generation in some countries. Within the framework of the energy transition, digester gases from sewage treatment plants and waste recycling plants are becoming increasingly important. The gas analysis component of the related plant technology plays an important role both for process monitoring and for safeguarding the plant components operated with the digester gas. The INCA gas analyser technology is specially tailored for this.

Union Instruments INCA 1000 Series

INCA 1000 Series

Modular measuring device for indoor installation without a gas cooler, max. 2 sampling points.

The devices of the INCA1000 series comprise multi-component gas analysers which are fixed engineered for use in a defined application. The sample must be condensate-free (see data sheet). The devices are designed for indoor installation and available in different versions

Union Instruments INCA 3000 Series

INCA 3000 Series

Modular measuring device for indoor installation without a gas cooler, max. 6 sampling points

The devices of the INCA3000 series are multi-component gas analysers for analysis of condensate-free sample gas. The devices of this series are specially designed for indoor installation and are available in different versions.

Union Instruments INCA 4000 Series

INCA 4000 Series

Modular measuring device for indoor installation with a gas cooler, max. 10 sampling points

The devices of the INCA4000 series are self-priming multi-component gas analysers for analysis of condensate-containing sample gas; exception: the INCA4004 version is used for condensate-free sample gas The devices of this series are specially designed for indoor installation and are available in different versions.

Union Instruments INCA 5000 Series

INCA 5000 Series

Modular measuring device for outdoor installation without a gas cooler, max. 10 sampling points

The devices of the INCA5000 series are multi-component gas analysers for analysis of condensate-free sample gas. The devices of this series are specially designed for outdoor installation and are available in different versions.

Union Instruments INCA 6000 Series

INCA 6000 Series

Modular measuring device for outdoor installation with a gas cooler, max. 10 sampling points

The devices of the INCA6000 series are multi-component gas analysers for measurement of condensate-containing sample gas. The devices of this series are specially designed for outdoor installation and are available in different versions.

Audible, Visual Sounders and Sirens are used for alert and alarm purposes in the process, mining and industrial applications.

Filter products Showing 1 - 16 of 53 results
Filter
E2S BExS110 Ex d Alarm Horn – Radial Omni-directional

BExS110 Ex d Alarm Horn – Radial Omni-directional

The flameproof BExS110 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards.

The BExS110-R is an alarm sounder featuring a radial omni-directional horn that disperses the alarm tones radially. Ideal for applications requiring a compact audible signalling solution.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.

 

E2S A105N Alarm Sounder

A105N Alarm Sounder

The A105N is a high output, 112dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A105N is MED approved.

Low current consumption and high SPL in a robust fire retardant IP66 housing ensure the A105N is suitable for all general signalling applications including fire, security and process control.

E2S A100 Alarm Sounder

A100 Alarm Sounder

The A100 is a compact, high output, 104dB(A) alarm sounder. CPR complaint, EN54-3 tested and UL approved. Featuring 32 alarm tone frequencies and 3 remotely activated stages/channels.

Low current consumption and high SPL in a robust fire retardant housing ensure the A100 is suitable for all general signalling applications including fire, security and process control. The A100 is a member of the versatile AlertAlarm family of industrial alarm horn sounders – also available with Xenon, AL100X or LED beacons, AL100H.

E2S A112N Alarm Sounder

A112N Alarm Sounder

The A112N is a high output, 119dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A112N is MED approved.

High SPL in a robust fire retardant IP66 housing ensure the A112N is suitable for all general signalling applications including fire, security and process control.

E2S A121 Alarm Sounder

A121 Alarm Sounder

The A121 is a very high output, 126dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use.

High SPL in a robust, fire retardant IP66 housing ensure the A121 is suitable for all general signalling applications including fire, security and process control.

E2S A131 High Level Audible Warning System

A131 High Level Audible Warning System

The A131 is a high output 131dB(A) @ 1 metre electronic siren in a compact and easy to install package. Using up to four speakers, it can be mounted in a variety of ways for applications with sound coverage requirements up to 300m.

The A131 modular system is ideal as a plant alarm to cover outdoor locations, areas with high background noise or smaller COMAH (Seveso II) applications. Offering a choice of three alarm stages, selected from a choice 45 tones including many national standard tones, it can be incorporated in fire, security and general alarm systems where existing equipment is not powerful enough or the system needs expanding.

E2S A141 High Level Audible Warning System 141dB(A)

A141 High Level Audible Warning System 141dB(A)

The A141 is the latest in a new generation of high output electronic sounders from E2S which are ideal for wide area and disaster warning applications requiring sound coverage up to 750m.

With a choice of 45 standard warning tones including many international signals the A141 is also available in a ‘Stage Programmable’ version which can offer up to 4 remotely activated stages of alarm. Typical installation include COMAH (Seveso II) Alarm, Toxic Gas Release, Fire, Security, Flood Warning, Tsunami Alert and Civil Defence.

E2S BExS110 Explosion Proof Alarm Horn Sounder

BExS110 Explosion Proof Alarm Horn Sounder

The flameproof BExS110 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. Available as SIL 1 and SIL 2 compliant.

Sound level outputs of up to 117dB(A) at 1 metre with a choice of 32 alarm tones and 3 remotely selectable stages.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.
Available in MED approved and SIL2 compliant versions.
For fire applications the BExS110D 24V dc siren is CPD EN89/106/EEC compliant (EN54-3 tested).

E2S BExS120 Explosion Proof Flare Horn Alarm Sounder

BExS120 Explosion Proof Flare Horn Alarm Sounder

The flameproof BExS120 alarm sounders are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards.

Sound level outputs are up to 123dB(A) at 1 metre with a choice of 32 alarm tones and 3 remotely selectable stages.
The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish.
For fire applications the BExS120D 24V dc siren is CPD EN89/106/EEC compliant (EN54-3 tested).

E2S BExH120 ‘Hootronic’ Explosion Proof Alarm Horn

BExH120 ‘Hootronic’ Explosion Proof Alarm Horn

The flameproof BExH120 Hootronic Siren is suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. The BExH120 authentically reproduces the traditional sounds of electro-mechanical devices whilst providing a significantly higher level of performance and reliability.

The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way. With output levels of up to 117.5dB(A) at 1 metre the BExH120 surpasses legacy electro-mechanical devices in performance and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.

E2S BEx Plated Assemblies

BEx Plated Assemblies

The BEx explosion proof Ex d family of alarm horn sounders, Xenon strobe and LED beacons can be configured to create sets of status lights suitable for onshore and offshore applications.

Mounted onto a stainless steel backplate, E2S can offer up to 5 different components complete with the option of Exe Junction Box to simplify installation. Status lights configurations can utilise the high power BExBGL2 LED beacon. Warning beacons utilising Xenon strobe technology – available in 5, 10, 15 and 21J outputs (up to 485 Cd) and providing effective warning in all conditions.

E2S BExBG05 Explosion Proof Xenon Beacon 5 Joule

BExBG05 Explosion Proof Xenon Beacon 5 Joule

The flameproof BExBG05 5 Joule, 120 candela Xenon beacons are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. Available as SIL 1 and SIL 2 compliant.

The BExBG05 5 Joule beacons robust construction enables installation in the harshest of environments. Additional features include automatic synchronisation on multi-beacon systems and stainless steel guard and mounting bracket as standard.
The BEx range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish. All models have two M20 cable entries, large termination areas containing in & out terminals and an ingress protection of IP66/67.

E2S BExBG10 Explosion Proof Xenon Beacon 10 Joule

BExBG10 Explosion Proof Xenon Beacon 10 Joule

The flameproof BExBG10 10 Joule, 380 candela Xenon beacons are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. Available as SIL 1 and SIL 2 compliant.

The BExBG10 10 Joule Xenon strobe beacons robust construction enables installation in the harshest of environments. Additional features include automatic synchronisation on multi-beacon systems and stainless steel guard and mounting bracket as standard.
The explosion proof Ex d BEx range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish. All models have two M20 cable entries, large termination areas containing in & out terminals and an ingress protection of IP66/67.

E2S BExBG15 Explosion Proof Xenon Beacon 15 Joule

BExBG15 Explosion Proof Xenon Beacon 15 Joule

The flameproof BExBG15 15 Joule, 468 candela Xenon beacons are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. Available as SIL 1 and SIL 2 compliant.

The BExBG15 15 Joule Xenon strobe beacons robust construction enables installation in the harshest of environments. Additional features include automatic synchronisation on multi-beacon systems and stainless steel guard and mounting bracket as standard.
The explosion proof Ex d BEx range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish. All models have two M20 cable entries, large termination areas containing in & out terminals and an ingress protection of IP66/67.

E2S BExBG21 Explosion Proof Xenon Beacon 21 Joule

BExBG21 Explosion Proof Xenon Beacon 21 Joule

The flameproof BExBG21 21 Joule, 520 candela Xenon beacons are suitable for Zone 1, 2, 21 & 22 applications. Approved to IECEx, ATEX, Ex EAC and INMETRO standards. SIL1 compliant.

The BExBG21 21 Joule Xenon strobe beacons robust construction enables installation in the harshest of environments. The BExBG21 has three distinct user selectable flash patterns and for units with DC operating voltages a second stage flash pattern can be selected remotely. Additional features include a stainless steel guard and stainless steel mounting bracket as standard.
The explosion proof Ex d BEx range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish. All models have two M20 cable entries, large termination areas containing in & out terminals and an ingress protection of IP66/67.

Manual alarm call points are designed for the purpose of raising an alarm manually once verification of a fire or emergency condition exists, by operating the push button or break glass the alarm signal can be raised.

E2S BExCP3-BG Break Glass Manual Call Point

BExCP3-BG Break Glass Manual Call Point

The BExCP3-BG break glass manual call points are designed for the harshest of environments and approved for Zone 1, 2, 21 and 22 explosion proof hazardous areas for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).

The BEx range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium with a chromated and powder coat finish. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The break glass element features a safety membrane and is designed to snap ensuring the no glass fragments are released during activation. A hammer is available as an accessory if required by local code.

E2S BExCP3-PB Push Button Manual Call Point

BExCP3-PB Push Button Manual Call Point

The BExCP3-PB push button manual call points are designed for the harshest of environments and approved for Zone 1, 2, 21 and 22 explosion proof hazardous areas for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).

The BEx range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium with a chromated and powder coat finish. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The BExCP3-PB is user re-settable by rotating the push button.

E2S IS-CP4-PB Push Button Manual Call Point

IS-CP4-PB Push Button Manual Call Point

The IS-CP4-PB push button manual call points are designed for the harshest of environments and approved for Zones 0, 1, 2, 21 & 22 requiring hazardous area intrinsically safe equipment for the control of fire and gas alarm systems. SIL2 compliant to IEC61508 (2010).

The IS-CP4 range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413) aluminium which is chromated and powder coated. Available with and without monitoring resistors all versions are certified to IECEx and ATEX standards with additional INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The IS-CP4-PB is user re-settable by rotating the push button.

E2S GNExCP6-BG Break Glass Manual Call Point

GNExCP6-BG Break Glass Manual Call Point

Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The break glass element features a safety membrane and is designed to snap ensuring the no glass fragments are released during activation. A hammer is available as an accessory if required by local code.

The flameproof GNExCP6-BG break glass manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free initiation solution for harsh and hazardous applications on and offshore.

E2S GNExCP6-PB Push Button Manual Call Point

GNExCP6-PB Push Button Manual Call Point

The flameproof GNExCP6-PB push button manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free solution for initiation in harsh and hazardous applications on and offshore.

Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also available with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The GNExCP6-PB is user re-settable by rotating the push button.

E2S GNExCP6-PT Push Button Tool Reset Call Point

GNExCP6-PT Push Button Tool Reset Call Point

The flameproof GNExCP6-PB tool reset push button manual call points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. The robust, lightweight GRP enclosure is UV stable and provides a corrosion free solution for initiation in harsh and hazardous applications on and offshore.

Available with optional EOL or series resistors, diode or Zener diodes and an LED indicator. Also available with either single or double pole change over switches. Certified to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals. The push button mechanism is protected by a spring loaded cover therefore the switch requires a two-action activation. The GNExCP6-PT is user re-settable via the use of the special key supplied with the unit.