Sintrol

Filter products Showing all 10 results
Price
Order By

Sintrol dust monitors are based on a unique Inductive Electrification Technique

The measurement is based on particles interacting with an isolated sensor connected to the channel or stack. When particles move in the gas stream and pass nearby the sensor, they will create an induction based AC signal that can be seen in certain frequency bands. Since dust affects the signal only for certain frequencies, the frequencies unrelated to dust measurement can be then filtered out before signal processing.

DUMO

DUMO

Continuous dust monitor for trend monitoring in ambient air environments.

With increasing demands for workplace health the ability to measure changes in ambient air dust concentration becomes more important by the day. All areas where dust might cause harm to employees or sensitive devices can now be monitored and dust extraction systems operated accordingly.

DUMO

DUMO PRO Ambient Dust Monitor

New and Improved continuous ambient air dust monitor for industrial environments.

Low maintenance real-time 24/7 trend monitoring in key areas to detect and alarm of dust events with fast response to changes in process conditions, the DUMO Pro utilises Sintrol’s proven measuring technology

Snifter A1+ Filter Leak Monitor

Snifter A1+ Filter Leak Monitor

Snifter A1+ is a low-cost easy to use filter leak detector. This filter leak detector is a direct replacement for the Snifter A1 device. Snifter A1+ can be used for monitoring outlets in a baghouse enabling fast identification of leaking compartments. Commissioning of the device is easy with the convenient auto setup function which identifies normal dust concentration within ten minutes of installation.

The Snifter A1+ dust monitor has two pre-set alarm limits for alarm and alert signals to give plant operators information on leaks and deteriorated filtration performance.

EX models (IECEx and ATEX) are available on Snifter A2 model and upwards.

Snifter A1+ Filter Leak Monitor

Snifter A2 Filter Leak Monitor

Snifter A2 is an advanced filter leak detector. This dust monitor can be used to monitor the operation of a baghouse and alarm the operator when dust levels increase. Snifter A2 supports Sintrol Network connectivity over USB and RS485 interfaces by default. All parameters and settings are user selectable to best suit custom application needs. This device is fully compatible with Sintrol DustTool software.

Auto setup function makes commissioning easy and quick and two independent alarm signals enable easy connectivity.

EX models (IECEx and ATEX) available. Wireless RF communication available.

S201 Dust Guard

S201 Dust Guard

With two independent alarm relays, Sintrol’s S201 allows the end user to identify bag leaks and deterioration of filters. Using our electric induction measurement principle, the dust monitor can be easily set up within 30 minutes of installation and gives plant operators quick notification of breaches in the filtration system.

Sintrol dust monitor allows end users to manually adjust alert and alarm level signals to tailor to their end needs. Different probe lengths and coatings give flexibility to meet a variety of applications.

S201 Dust Guard

S203 Trend Monitor

Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.

State of the art Inductive Electrification principle minimises the need for maintenance on the dust monitor and provides an accurate trend for end users. 4-20mA output combined with an easy to use auto-setup feature that takes less than 30 minutes from installation makes the device both convenient and reliable.

S303 Process Dust Monitor

S303 Process Dust Monitor

Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.

State of the art Inductive Electrification principle minimises the need for maintenance on the dust monitor and provides an accurate trend for end users. 4-20mA output combined with an easy to use auto-setup feature that takes less than 30 minutes from installation makes the device both convenient and reliable.

S303 Process Dust Monitor

S304 Emissions Monitor

For applications requiring absolute value measurements of dust concentrations, the S304 can be calibrated to give the user a mg/m3 output. Once calibrated, this dust monitor helps plant operators know exactly how much dust is passing through the stack or outlet duct of their plant.

The S304 is additionally equipped with a 4-20 mA signal and two independent alarm relays that can be used to further optimised process conditions in the plant.

Utilising our unique Inductive Electrification principle, the S304 brings the reliability the government requires and combines it with the convenience plant operators expect from a particulate measurement device. With minimal maintenance required, this is an optimal solution for plant operators needing to measure stack dust emissions for government control.

DustLog8

DustLog8

DustLog 8 is the premier central management solution for dust measurement equipment.

It gives plant operators full control over the network of dust monitors with efficient parameterising, reporting and networking functions on an easy to use interface. By unifying all of Sintrol’s latest technology into one management tool, DustLog 8 brings not only greater convenience and usability, but also improves plant efficiency, network management and worker safety for the end user.

The DustLog 8 PC software can be connected via a network router to the dust monitors. RS485, Modbus and RF are supported

Wireless Solutions

Wireless Solutions

In addition to our measurement devices, Sintrol’s Wireless Monitoring System makes it easier to connect, track, manage and control a network of dust monitors. Using any combination of Sintrol’s dust monitors, the entire system can be integrated and set up via our RF network and managed with our DustLog 8 software.