GD10P Hydrocarbon Infra Red Point Gas Detector The Simtronics GD10P detector is the benchmark for combustible gas detection for offshore oil and gas installations. It has set the standard for gas detectors in the areas of safety, stability and low maintenance both onshore & offshore. The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These IR gas detectors differ from all other models, because they utilise silicon based solid-state IR sources. The complete opto-mechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs. We offer the longest combined detector and IR source warranty on the market. For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using cabling and control modules.
GD10P CO2 Gas Detector The Infrared (IR) gas detectors differ from all other models, because they utilise silicon based solid-state infrared sources. The complete opto-mechanical design construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs. The Simtronics GD10 Series of gas detector offers the longest combined detector and IR source warranty on the market: 5 years warranty & 15 years on IR sources.
GD10PE High Sensitivity Gas Detector The GD10PE is designed for critical applications involving large volumes of air with high velocity. In places where you need fast reliable detection of low gas concentrations, GD10PE is in a class of its own. The versatile GD10PE is suitable for monitoring, among others, the HVAC air intakes of living quarters, temporary refuges and local equipment rooms. In addition, the ventilation air and combustion air intakes of gas turbines can be monitored along with the ventilation air extract duct, the only location where you can guarantee to detect a gas leak on a turbine package. With a measuring range of 0-20%LEL the GD10PE is 5 times more sensitive than standard point detectors. This, and a response time in the region of 1 second should cover even the most demanding requirements. It can also tolerate continuous operation at 85°C inside the duct.
OLCT100 Gas Detector The high-performance OLCT 100-XP-MS range of flammable gas detectors from Teledyne Gas and Flame Detection now incorporates cutting-edge MEMS (Micro-ElectroMechanical Systems) sensor technology. Delivering the market’s most accurate readings for over 14 of the most common combustible gases and gas mixes — including hydrogen, methane, propane and butane — MEMS technology adds to the capabilities provided by conventional sensors. Users also enjoy notable advantages regarding ‘poison’ immunity and operating life, particularly in environments that sometimes prove challenging for catalytic sensors.
iTrans2 Gas Detector The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance, and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up, or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.
CTX300 Gas Detector When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol.
OLCT10N Gas Detector Digital combustible detector for oxygen, toxic or combustible gases. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.
OLCT10 Gas Detector Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapours in ambient air. Easy to install and operate, these detectors combined with the MX 32 control unit meet demanding user requirements.
SpyGlass Open Path Combustible Gas Detector The Spyglass system detects hydrocarbon gases by analysing the absorption of radiation caused by gases in the atmosphere and comparing it to background atmospheric absorption. This is accomplished between a pair of units: a Flash Source and a Detector that can monitor a distance of up to 200 metres. Spyglass Gas Detectors are robustly designed and can handle the toughest environments: 316L stainless steel housings that meet IP66/IP68 and NEMA 250 6P egress standards; circuit boards epoxy coated for protection; MIL-C-810C testing for humidity, salt, fog, vibration, mechanical shock and temperature extremes; and SIL-2 approval per IEC61508 is a final statement in reliability.
DG-TX7 Catalytic Combustible Gas Detector The MultiXplo DG-TX7 intelligent catalytic sensor based flammable gas detector used to detect Hydrogen H2 and other HC gases. The device has been designed for ease of installation, operation and maintenance in testing environments.
GD1 H2S Laser Diode Open Path Detector The Simtronics GD1 sets a new standard for toxic gas detection. Using a laser diode technology, the GD1 delivers enhanced coverage and fail-safe detection. The performance improvement marks a genuine step change for safety systems and life cycle cost savings. The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no interference from other gases. Unlike traditional methods for detecting H2S (MOS or EC cell) the GD1 needs no recalibration and can replace multiple standard detectors to cover the same risk. The complete optomechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs. Supplied with worldwide hazardous area approvals. Sui table for use in systems with SIL 2 requirement.